Digiducer 333D01 USB Digital Acceler Multi-Instrument Manual
Virtins Technology
1.7 Hard Reset
A hard reset can be done via disconnecting the USB accelerometer from your computer and
then re-connect it to the computer again. You should only do this with the Multi-Instrument
software closed.
1.8 Non-routine Applications
The non-routine applications refer to those applications that are not considered as routine
tasks of an accelerometer. With Multi-Instrument’s capability of simultaneous input and
output, you can generate a stimulus to a Device Under Test (DUT) and acquire the response
from it at the same time. Different stimuli can be generated and the responses can be
analyzed in different ways. The characteristics of the DUT, such as frequency response and
distortion, can then be obtained. You can even configure and then perform a sequence of
automated test steps to evaluate a DUT using the Device Test Plan software module.
You can configure the output device via [Setting]>[DAC Device]. For example, the
computer sound card can be used to generate vibration stimulus to some external devices
which then generate mechanical vibration.
www.virtins.com 7 Copyright © 2015 Virtins Technology
