VS-500 ULV Device
User Manual
When any maintenance is needed, please do not forget to stop the device. Please contact with
Virosmart in case of any fault occurred within this user manual. If any spare part replacement is
needed during maintenance, replace only with original parts. Do not ever keep any flame close to the
device during maintenance or assembly. Clean the surface of the device with a wet cloth after each
use.
5.1. Fluid Tank
-
Regularly shake fluid tank with clean water and pour the water.
5.2. Air Filter
-
Replace sponge air suction filter with the spare filter after each use and dry it after washing
(Only use water)
-
Device maintenance should be performed annually in a regular basis and engine should be
checked. (service)
Use 220-230 V 50-60 hz power.
1. Chassis
2. ULV Cap
3. Tank (5 lt. & 10 lt.)
4. Tank Cap
5. On-Off Button
6. Handle
7. Nozzle
8. Air Filter
9. M8 Bolt
10. Regulator
11.8 mm Hose
12.Suction Tube
13.Suction Seal
Make sure all safety measures are taken before turning the device on.
TURNING ON
1. Before turning the device on, take the necessary measures.
2. Fill the fluid necessary for the implementation area to the tank.
3. You should adjust regulator in accordance with the fluid amount to be used in the area. See
the chart on regulator for information.
4. Ensure you have the appropriate PPE.
5. Switch the On-Off button to
“on” position.
6. The device will automatically start.
TURNING OFF
After use Switch the On-
Off button to “off” position and turn off at the wall, before removing the plug.
Check the tank, If needed fill up the tank with the suitable disinfectant.
5. Maintenance and Cleaning
6. Power
7. Device Part List
8. Turning On/Off the Device
