background image

4

VR 550E

L x W x H

Lead-acid battery

100W

7AH

Motor

Rated Voltage

 

No Load Speed 

Rated Output

Rated Output Torque

 

Battery Type

Battery Capacity

Nominal Battery Voltage 

Charger Output

Charger Input

Max Speed

Range

Turning Radius 

Grade Ability

Wheel Base

Net Weight

 

30.45 lbs. (13.8 kg)

720mm

Max. Load

120 lbs. (54 kg)

Recommended Load

81-120 lbs. (37-54 kg)

17mm

7 in. solid tire

IPX4

32ºF-104ºF (0ºC-40ºC)

5ºF-104ºF (-15ºC-40ºC)

Min. Ground Clearance

Tire

IP Rating

Operating Temp.

Charging Temp.

Charging Time

Charger Model

Battery Working Temp.

10-12 Hours 

10 mph (16 km/h) 

6 mi. (9.6 km)

4.22 ft. (1.3 m)

Charger Manufacturer

12V

100-240VAC

12VDC/800mA/50-60HZ

36.69x14.37x36.42 in.

(932x365x925mm)

Shenzhen Fuyuandian 

Power Co., Ltd. 

 

DC brush motor

12V

3300±200rpm

0.35N.m

FY0171200800

32ºF-104ºF (0ºC-40ºC)

Kickstand

Brake

Throttle

LED Lights

Power Switch

Charging Port

Attach the handlebar to the scooter, 

making sure it is inserted all the way in. 

Tighten the screws with the Allen wrench. 

5

2

An adult must assemble the handlebar to the unit. 

NOTE

1

4

3

Turn the unit ON. Release the kickstand. Place one foot flat 
on the floor for stability. Place your other foot on the front 
of the deck.

Hold both handlebars with your thumb on the throttle.

2

1

Push off of the ground and press the throttle button with 
your thumb. Bring your foot onto the back of the deck.

Turn the handlebar left to turn left and right to turn right. 
Slightly lean into the direction you are turning. Pull the 
brake toward you to slow or stop the scooter.

4

3

VR 550E

O = OFF

I = ON

 Fully charge the VR 550E before first use.  Follow the charging instructions on page 6.

• 

Put on all recommended protective gear. 

 Fully read this entire user guide before attempting to ride.

 Ask a competent adult to help you ride until you are comfortable.

NOTE

Rotate the brake so it faces away from the handlebar. 

Tighten the screw with the Allen wrench. 

Summary of Contents for Rides VR 550E

Page 1: ...kes com to register your product and to enter our sweepstakes No purchase necessary The Little Tikes Company an MGA Entertainment company VIRO RIDES is a trademark of Little Tikes in the U S and other countries All logos names characters likenesses images slogans and packaging appearance are the property of Little Tikes Little Tikes Consumer Service 2180 Barlow Road Hudson Ohio 44236 U S A 1 800 3...

Page 2: ... manufacturer Like other electric ride on products this scooter is intended to move and it is therefore possible to lose control fall off and or get into dangerous situations that no amount of care instruction or expertise can eliminate If such things occur the user can be seriously injured or die even when using safety equipment and other precautions RIDE AT YOUR OWN RISK AND USE COMMON SENSE WAR...

Page 3: ...ks on the scooter It is not made to withstand abuse from misuse such as jumping curb grinding or any other type of stunts Racing stunt riding or other maneuvers also enhance the risk of losing control or may cause uncon trolled rider actions or reactions The scooter is intended for use on flat dry surfaces such as pavement or level ground without loose debris such as sand leaves rocks or gravel On...

Page 4: ...Charging Port Attach the handlebar to the scooter making sure it is inserted all the way in Tighten the screws with the Allen wrench 5 2 An adult must assemble the handlebar to the unit NOTE 1 4 3 Turn the unit ON Release the kickstand Place one foot flat on the floor for stability Place your other foot on the front of the deck Hold both handlebars with your thumb on the throttle 2 1 Push off of t...

Reviews: