20
EN
2
EN
Main.components
Pos..Name
. ..Support
2. Rubber.casing
. ..Ventilation.slots
. ..Rear.handle
5. Lock-on button
6. ON/OFF switch
7. Cord.protector
8. Hex.wrench
9. Holder
.0..Screw
...Strap
.2..Piston
13. Blade
...Centring.pin
15. Joint opening
16. Profiled groove
.7..Limiting.pin
.8..Clamping.screw
.9..Shaft
20 Bracket
Operating.instructions
This power tool is supplied from single-phase alternating current mains only. It is double insulated ac
-
cording to EN 60745-1, IEC 60745 and can be connected to grounded or not grounded sockets. This
power tool is radio suppressed in compliance with EMC Directive 2004/108/EC.
This power tool is designed for sawing pipes, metal and plastics profiles and light construction materi
-
als (aerated concrete blocks), using suitable saw blades.
Prior.to.initial.operation.
▪ Make sure the power supply voltage corres¬ponds to the value indicated on the name plate with
technical.data.of.the.tool.
▪ Always check the position of ON/OFF switch. The power tool must be connec¬ted to the power
supply socket only when this switch is in OFF position. If the plug is connected to a receptacle while
the.power.switch.is.in.the.ON.position,.the.power.tool.will.start.operating.immediately,.which.could
cause.a.serious.accident.
▪ Make sure that the cord and the plug are in order. If the replacement of the supply cord is necessary,
this.has.to.be.done.by.the.manufacturer.or.his.agent.in.order.to.avoid.a.safety.hazard.
.
WArNING:.
Always.switch.off.and.unplug.the.power.tool.prior.to.any.adjustment,.servicing.
or.maintenance.
Selecting.the.blade
This power tool can be operated with shank mounting dimensions 12,7 and 20 mm.
Select.the.blade.depending.on.the.processed.material.-.blade.for.sawing.metal,.blade.for.sawing.
wood,.all-purpose.blade,.etc.
Technical specifications
The package includes:
Sabre saw; bracket; hex wrench S4.
Model
045001
Power.input..
00.W
No load stroke speed
2200 min
-
Stroke length
30 mm
Blade shank mounting dimensions
12,7 mm; 20 mm
Free-hand cutting capacity
Ø6”, 168 mm
Square cutting capacity
Ø6”, 168 mm
Overall length
585 mm
Weight (EPTA Procedure 01/2003)
3,5 kg
Safety class (EN 60745-1)
II
NOISe.AND.VIbrATION.INFOrMATION.
.
Measured values determined according to EN 60745.
NOISe.eMISSION
.
A-weighted.sound.pressure.level.L
pA
Uncertainty К
pA
A-weighted.sound.power.level.L
wA
Uncertainty К
wA
Wear.hearing.protection!
.
VIbrATION.eMISSION.*
.
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Vibration.emission.value.a
h,CW
Uncertainty..K
h,CW
* The vibration emission values are determined according to 6.2.7 EN 60745-1:2006.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used.for.a.preliminary.assessment.of.exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is.used.for.different.applications,.with.different.accessories.or.poorly.maintained,.the.vibration.emis-
sion may differ. This may significantly increase the exposure level over the total working period.
Operation
Before using the power tool, familiarize yourself with all the operating features and safety require
-
ments..Use.the.tool.and.accessories.only.for.the.applications.intended..All.other.applications.are.
expressly.ruled.out.
87
dB (A)
3
dB
98
dB (A)
3
dB
25
m/s2
1.5
m/s2