Viptela vEdge 100wm Series Manual Download Page 2

Figure 2: Back Panel of the vEdge 100wm Router

Declaration of Conformity, on page 2

Components and Specifications, on page 3

Planning and Installation, on page 11

Maintenance and Troubleshooting, on page 25

Declaration of Conformity

The Viptela products are controlled under the Commerce Control List (CCL) of the U.S. Export Administration
Regulations (EAR) as networking equipment within the following U.S. Export Control Classification Numbers
(ECCN): 5A002, 5D002, and 5E002.

The vEdge hardware and software products and the Viptela encryption technology can be delivered to most
end users and destinations worldwide without a licensing requirement. The Viptela solution and products
have undergone a one-time review by the Government of the United States of America and qualify for License
Exception ENC. As such, they are eligible for export according to Section 740.17 of the EAR.

The Viptela solutions and products can be delivered to most end users worldwide, except to entities or end
users in the following countries: Cuba, Iran, North Korea, Sudan, and Syria.

Controlled Technologies

Viptela manages technology subject to the U.S. Export Administration Regulations (EAR). These controlled
technologies may include items under U.S. ECCN 5E002 encryption technology. The Viptela encryption
technology is for the development, production, and use of Viptela products that implement or use encryption.

vEdge 100wm Router

2

vEdge 100wm Router

Declaration of Conformity

Summary of Contents for vEdge 100wm Series































Reviews: