2
CD-ROM Box Enclosure Installation Guide
2-1 Installation
The following sections will guide you through the installation of a CD-ROM drive
in the CD-ROM Box Enclosure. There are two parts to the installation:
• Disassembly of the CD-ROM Box Enclosure (as it is shipped)
• Assembly of the drive in the CD-ROM Box Enclosure
A small Phillips screwdriver is the only tool required.
2-1.1 Disassemble the CD-ROM Box
1. Remove the four rubber stands by gently prying them off.
2. Remove the eight retaining screws from top and bottom covers.
3. Separate the following parts:
• Top and bottom enclosure covers
• Two drive rails
• End-panel with connectors and fan
Retaining
Screws
(x4)
Rubber
Stands
(x4)
Drive Rails
Connectors/Fan
End-Panel
CD-ROM Box Components
Retaining
Screws
(x4)
