background image

Contents

1.  Introduction .................................................................................  4

1-1  Features and Specifications ...........................................................  4

1-2  USB 2.0 External Drive ................................................................  5

1-3  Package Checklist .........................................................................  5

2.  Hardware Installation .................................................................  6

2-1  Analog Audio Connector(JP1) .......................................................  6

2-2  Jumper Settings .............................................................................  6

2-2.1  Jumper Settings for assembling with MobileRack ...................  6

2-2.2  Temperature Control Jumper Settings (Only VP-6228T) .......  7

2-3  Assemble the USB 2.0 External Enclosure with a 5.25”

Device ...........................................................................................  8

2-4  Connect the USB 2.0 External Enclosure VP-6228(T)

to Your Computer ........................................................................  17

3.  Drivers Installation ...................................................................  18

3-1  Windows 98SE ............................................................................  18

3-2  Windows Me/2000/XP .................................................................  22

3-3  Mac OS ........................................................................................  22

4.  Using The USB 2.0 External Enclosure ..................................  23

4-1  Connect the USB 2.0 External Enclosure VP-6228(T)

to Computer .................................................................................  23

4-2  Disconnect the USB 2.0 External Enclosure VP-6228(T)

from Computer ............................................................................  23

5.  Partitioning the External USB 2.0 Hard Disk .........................  25

5-1  Partition Under Windows 98/ME ................................................  25

5-2  Partition under Windows 2000/XP ...............................................  27

Summary of Contents for 5.25-inch External Enclosure VP-6228T





























Reviews: