© 2013 Directed. All rights reserved.
2
and confirms the motion detector is paired
with your system.
5. After the motion detector is paired, you can
give it a unique name (i.e. “Living Room”)
In this screen, if you click the “More” button,
you can set up additional options for the de-
vice, such as “arm stay”, or “custom arm”, as
well as select what action the motion detector
performs when triggered.
6. Once completed, click the “Finish” button.
The motion detector is now ready for mount-
ing.
Mounting instructions:
1. The spherical lens must be
pointing down and placed on a
wall where it will detect move-
ment inside the room.
2. The device should be placed
approximately 86” from the
floor and at least 4” from the
ceiling.
Note
: Do not place the device
in an area that receives direct
sunlight.
3. Once you have chosen the
desired mounting location,
remove the backing from the
tape on the battery cover and mount the de-
vice. Alternatively, you can also mount the de-
vice with standard drywall screws by screwing
Ceiling
Floor
