Viper 5806V, Owner'S Manual

Page: 12 / 54

8
© 2016 Directed. All rights reserved.
Remote Control Command table
Button
Level
Direct Access
A U X
x 1
LEVEL 1
A U X
x 2
LEVEL 2
A U X
x 3
LEVEL 3
A U X
x 4
LEVEL 4
A U X
Arm/Lock
(Panic) Silent Arm Sensor
Bypass Sensor Silent
Arm Full Silent
Arm
A U X
Disarm/Unlock Silent Disarm Remote Valet Car Finder
A U X
Remote Start Runtime
Reset Timer Start Smart Start Defogger
AUX AUX/Trunk AUX 1 AUX 2 AUX 3 AUX 4
A U
X
Advance Level,
Change Car
(3 sec.), Enter
programming
(8 sec.) Temperature
Check
(2-way only) Arm Status
(2-way only) Runtime
Remaining
(2-way only)
Fault Condition Alerts
If, when performing a command, a condition exists that does not al-
low activation of an Alarm feature* or Remote Start feature**, a fault
tone plays to alert of the fault condition.
* Alarm feature not available when the system status is incorrect
upon receiving the command. (Example: Sensor bypass com-
mand is received when disarmed).
Refer to the notes included in the following command descriptions
that address these faults or go to
Feature not Available under the
“Remote and System Operations” on page 34 for details.
** Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime Reset
command received when remote start is off).