Instructions for use and assembly
2014
Page 10/1
1
Manufacturer: VIPAMAT FRANCE EN 12-01 Instructions for use and assembly
– V1 - 26/11/2014
MOUNTING THE BACK SKI
S
3. Insert the half-axles on the frame in ensuring that the clips lock sec
urely on the frame’s rear axle (Figure 13).
4. Fasten the red safety strap on one of the back gallows of the frame when a helper pushes the Hippocampe with the
push bar, or on one of the front gallows when a helper pulls the Hippocampe with the towrope (Figures 14 and 15).
5. The helper must put the strap on his wrist for each use.
6. Verification:
- check the exit of the half axle's clips in the rear axle in pressing on the clip and in checking its exit.
Use of the Hippocampe with the 3 skis kit:
- Use the Hippocampe on ski slopes or on luge tracks is prohibited.
- It is imperative to use the Hippocampe equipped of the 3 skis kit with a helper who has the capacity to hold the
Hippocampe with his user and to maintain the security strap.
- It is imperative that the helper maintains the security strap on wrist: it must be fastened laterally on the gallows of
the frame, or on one of the front gallows when the Hippocampe is pulled.
- Do not go on snowy slopes higher than 10%.
- Wearing a helmet is also recommended.
NB: The serial number of the front ski is engraved on the ski and for the rear skis on one of the vertical tube of the
skis feet.
11
14
15
The back ski kit comprises (Figure 11) :
- 2 skis « feet + snowboards »
- 1 red safety strap
1. Remove the rear wheels half-axles by pressing on the clip of the half-axles.
2. Insert the half-axles in both skis feet (a) + (Figure 12).
(a)
A
12
13