VIPA System 200V IM Series, Manual

Page: 306 / 348

Chapter 8 Ethernet coupler
Manual VIPA System 200V
8-2 HB97E - IM - Rev. 06/29
System overview
Typical fieldbus systems are divided into master and slave systems.
Master system are CPs, coupled to a CPU, allowing remote programming
res. visualization of the according CPU as well as the data transfer
between several TCP/IP participants.
Slave systems on the other hand are "data collectors" that deliver the I/O
data of the connected modules to the requesting master.
The Ethernet coupler described in this chapter is a slave system.
For the communication happens via TCP/IP, the slave system is referred to
as server and a master as client.
The Ethernet coupler from VIPA allows you to connect up to 32 modules of
your System 200V periphery via Ethernet. With each protocol up to 8
clients may communicate simultaneously with the Ethernet coupler.
At this time, VIPA offers the following Ethernet coupler:
PW
RD
ER
S
A
C
IM 253 NET
NET
VIPA 253-1NE00
X 2
3 4
1
2
-
+
X1
DC24V
Type Order number Description
IM 253NET VIPA 253-1NE00 Ethernet coupler
Ordering data
Ethernet coupler