Safety information
Manual VIPA System 200V
2
HB97E - PS-CM - Rev. 06/29
Safety information
The System 200V is constructed and produced for:
•
all VIPA System 200V components
•
communication and process control
•
general control and automation applications
•
industrial applications
•
operation within the environmental conditions specified in the technical
data
•
installation into a cubicle
Danger!
This device is not certified for applications in
•
in explosive environments (EX-zone)
The manual must be available to all personnel in the
•
project design department
•
installation department
•
commissioning
•
operation
The following conditions must be met before using or commissioning
the components described in this manual:
•
Modification to the process control system should only be carried out
when the system has been disconnected from power!
•
Installation and modifications only by properly trained personnel
•
The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Applications
conforming with
specifications
Documentation
Disposal
Summary of Contents for System 200V CM
