2.3.3 Memory management
The following memory systems are available for every Touch Panel:
n
256Mbyte work memory
n
128Mbyte Flash disk (50Mbyte for user data)
n
USB storage media using "Host"-USB-A interface
n
Slot for SD
Every Touch Panel has a work memory with a size of 256Mbyte. The
work memory is not buffered and is deleted after shut down. Please
regard that also registry entries are stored in the work memory that
are set back to default settings after the next re-boot.
As internal permanent storage medium every Touch Panel has a
flash disk with a size of 128Mbyte (50Mbyte user data). After the start
of Windows
Ò
CE this memory is listed as
Flashdisk
at
My Device.
The connection of USB sticks and USB drives by use of the "Host"-
USB-A interface is supported by the Touch Panel. After connection
the storage media is listed as
Hard Disk
at
My Device
.
At the back of the Touch Panel there are the card slots for memory
cards. At this slot you may plug storage modules of the type SD. The
card may be plugged and removed during runtime and is immediately
listed as
SDMMC Card
at
My Device.
2.4 Dimensions
For the installation of the Touch Panel in control cabinets and desks
the following dimensions are necessary:
Overview
Work memory
Flash disk
USB storage media
Slot for SD
Installation dimensions
VIPA HMI Touch Panel
Hardware description
Dimensions
HB160 | TP-ECO | 62K-NHC0 | GB | 14-27
16
