9
Visit
help.c5k.info
for more information and support
3.1 First Boot and Startup Wizard (cont.)
Fig. 3.8a:
Home Screen
Fig. 3.8c:
Manual S/N
Fig. 3.8e:
Device Details
Fig. 3.8b:
QR Scan
Fig. 3.8d:
Add Device
Fig. 3.8f:
Alarm Notification
1. Go to the
Home
screen.
2. To add your NVR by QR Code, select the
Button
and then select
SN/Scan
.
3. Scan the
Device SN
QR code that you see in
the P2P section (Fig. 3.7).
4. Optionally, select
Manually Enter SN
to type
in the device SN (serial number) to manually
add device.
5. Select the
Device Type
as NVR.
6. Choose a name for your NVR in
Device Name
.
7. Enter the
Username
and
Password
for your
NVR. The default username is
admin
and the
password is what was set in
Section 3.1.2
8. Tap “
Save
”.
The following details remote view configuration
via the
DMSS app
(Apple iOS / Android) on your
device. Depending on the device or app version,
menus may function or appear slightly different to
those explained below.
Remote View: Adding NVR via QR Code
1. Go to the
Home
screen.
2. Select the
... Button
on the device to add
push notifications for.
3. Select
Device Details
.
4. Select
Notifications
.
5.
Toggle Alarm Notifications to
ON (blue)
.
6.
Tap on the notifications you wish to receive and
enable them. E.g. To enable notifications for
Low HDD Space: Tap Disk Alarm, then enable
Low Space.
7. Tap “
Save
”.
Remote View: Enabling Push Notifications
After adding your Recorder to your iOS / Android
device, the next step is to enable notifications.
This will allow you to receive & respond to
surveillance app alerts on your device.
