16/24-Port PoE Switch
©r------------------'
Monitored Packets
D
i
sable
L
Save
_ I
LR
efre
�
Figure 5-2
■
Srt::Port
• Destination port: The monitor port. Please select only one item. The default setup is
disabled.
• Source port: The port being monitored. Please select one or more item(s).
• Enable mirror: There are four modes: Disable, Tx only, Rx only, enable.
Refer to table 5-5 for port mirroring setup.
Name
Note
Mirrored Packets Disable (default)
Disable the monitor function
Tx only
Monitor output packets
Rx only
Monitor input packets
Enable
Monitor input/output packets
Destination port
Monitor port. Please select only one item. The default setup is disabled.
Source port
The port being monitored. Please select one or more item(s).
Table 5-5
Config example.
1 . Network connection
Enable port mirroring function so that the port 1 can monitor the packets of port 2 and
port 3.
2. Settings
( 1 ) Enable port mirroring function and select the data streams to monitor.
( 2) Select source port.
( 3 ) Select destination port. Now the interface is shown as in Figure 5-3.
System Config
Port Management
>
Port Conflgurallon
Port Mirroring
Port M
i
l'l'oring
>
PortStatistics
>
Port Speed Limit
>
Broad�asl Storm Control
> Long Distance
Device Management
PoE
5.3 Port Statistics
Monitored Packets
l
n
g
r
e
ss&Eg
r
e
ss
Dest Pon
10
11
12
13
14
15
16
17
18
Save
II
Ref
r
es
h
Figure 5-3
J
Figure 5-4 is the switch port statistics interface. Here is to display the inbound/outbound
packet amount of each port, conflict statistics, packet loss amount, CRC error packet and
etc. The port working performance is low if the error packet amount is too huge, please
check the port cable connection or confirm corresponding opposite port has problem or
not.
Pon Stauslica
Cooo� Mooe Se.«t>on Tr
;
m,mit P.a.cket S. ReceNe P.a.cket
Figure 5-4