background image

Important Safeguard and Warning 

Please read the following safeguards and warnings carefully before using the 

product in order to avoid damages and losses. 

Attentions: 

•  Do not expose the device to lampblack, steam or dust.  Otherwise it may cause

fire or electric shock.

•  Do not install the device at position exposed to sunlight or in high temperature.
•  Temperature rise in device may cause fire. 
• Do not expose the device to humid environment. Otherwise it may cause fire. 
•  The device must be installed on solid and flat surface in order to guarantee

safety under load and earthquake.  Otherwise, it may cause device to fall off or
turnover. 

•  Do not place the device on carpet or quilt. 
•  Do not block air vent of the device or ventilation around the device.  Otherwise, 

temperature in device will rise and may cause fire.

• Do not place any object on the device. 
•  Do not disassemble the device without professional instruction. 

Warning: 

•  Please use battery properly to avoid fire, explosion and other dangers. 
•  Please replace used battery with battery of the same type. 
• Do not use power line other than the one specified.  Please use it properly.

Otherwise, it may cause fire or electric shock. 

Special Announcement: 

• This manual is for reference only.
• All the designs and software here are subject to change without prior written

notice.

• Always follow the instructions listed on the manual. We are not liable for any

problems caused by unauthorized modifications or attempted repair.

• All trademarks and registered trademarks are the properties of their respective

owners. 

•  If there is any uncertainty or controversy, please refer to the final explanation

of us.

•  Please visit our website for more information.

VSPOE-SWA24 / 

VSPOE-SWA16

User Manual

Summary of Contents for VSPOE-SWA16



























Reviews: