background image

                                                                     

 

20 

Set up DDNS on your NVRPRO (optional) 

 

DDNS is a service that will track your numeric IP address and allow you to attach an alphanumeric 

address. So for example, i

nstead of using “123.123.123.123” (the Google address) you would use 

“google.com”. 
 

Why use DDNS? 

 

Remembering a numeric IP address can be complicated, where an alphanumeric address is easy to 

remember. The other main advantage for DDNS is If you have a dynamic ip address, (where your 

address can change monthly) the DDNS service will track and update with your new IP address 

automatically. So no matter what your numeric ip address is, your alphanumeric address will work. There 

are free and paid services available, however a free DDNS service has been built in to these DVRs. This 

tutorial will go over how to set up your DVR to use the free DDNS service. 

 

How to enable your DDNS? 

 

In order to set up DDNS on your NVRPRO, you will need to enable the DDNS service in the Network 

settings. MENU > SETTING > NETWORK > NETWORK SETTING > DDNS (double click). 

 

     Set DDNS Type    to "Private DDNS" and Tick    ENABLE 

 

     SERVER IP    to www.dahuaddns.com 

 

      DOMAIN MODE    to "Default Domain" 

 

     DOMAIN NAME is your unique    <MAC address>.dahuaddns.com 

 

     Username is left Empty 

 

Now when trying to connect externally you would now use the CURRENT HOST ADDRESS 

instead of the internal IP address.

 

 

     e.g. <MAC address>.dahuaddns.com 

 

(Note: This is also dependent on Port forwarding being set up in your ADSL modem. Please use the 

default unique ID not <MAC address> as it is just an example). 

 

Summary of Contents for NVR8PRO(PACK)2NP




























Reviews: