10
Using the NVR to set the IP Address of an IP Camera
1. Right click to open the menu and select MAIN MENU, then select REMOTE DEVICE
2. Click IP SEARCH
to begin scanning for all the attached IP Cameras.
3. The NVR will find your new IP cameras (normally with a default IP Address of 192.168.0.108). You
can then click on the IP Cameras Edit button
to change its IP Address.
4. Change the IP Cameras IP Address, Subnet mask, and Gateway to the new IP address range.
Then click Ok to save.
In this example we have used 192.168.0.
101
