background image

                                                                     

 

24 

Limited Warranty 
 

Cornick Pty Ltd (Seller)

 

warrants  its  products  to  be  in  conformance  with  its  own  plans  and  specifications  and  to  be  free  from 

defects  in  materials  and  workmanship  under  normal  use  and  service  for  twelve  months  from  the  date  of  original  purchase. 

Sellers obligation shall be limited to repairing or replacing, at its option, free of charge for materials or labor, any part which is 

proved  not  in  compliance  with  Sellers  specifications  or  proves  defective  in  materials  or  workmanship  under  normal  use  and 

service. Seller shall have no obligation under this Limited Warranty or otherwise if the product is altered or improperly repaired 

or serviced by anyone other than Seller.   

 

For Warranty Service:

 Return transportation prepaid with a copy of your purchase receipt and contact details to: 

RhinoCo Technology, 9 Hannabus Place, McGraths Hill, NSW 2756 Australia

Seller has no obligation to attend the buyer‟s location to retrieve the goods or make repairs onsite. 

 

 

There  are  no  warranties,  expressed  or implied,  of merchant  ability,  or  fitness  for  a particular  purpose  or  otherwise,  which 

extend  beyond  the  description  on  the  face  hereof.  In  no  case  shall  seller  be  liable  to  anyone  for  any  consequential  or 

incidental  damages  for  breach  of  this  or  any  other  warranty,  express  or  implied,  or  upon  any  other  basis  of  liability 

whatsoever, even the loss or damage is caused by its own negligence or fault. 

 

Seller does not represent that the products it sells may not be compromised or circumvented; that the products will prevent 

any  personal  injury  or  property  loss  by  burglary,  robbery,  fire  or  otherwise;  or  that  the  products  will  in  all  cases  provide 

adequate  warning  or  protection.  Customer  understands  that  a  properly  installed  and  maintained  alarm  system  or  video 

surveillance  system  may  only  reduce  the  risk  of  a  burglary,  robbery,  or  fire  without  warning,  but  it  is  not  insurance  or  a 

guarantee that such will not occur or that there will be no personal injury or property loss as a result. 

 

Consequently,  seller  shall  have  no  liability  for  any  personal  injury;  property  damage  or  other  loss  based  on  a  claim  the 

product  failed  to  give  any  warning.  However,  if  seller  is  held  liable,  whether  directly  or  indirectly,  for  any  loss  or  damage 

arising  under  this  limited  warranty  or  otherwise,  regard  less  of  cause  or  origin,  seller's  maximum  liability  shall  not  in  any 

case exceed the purchase price of the product, which shall be the complete and exclusive remedy against seller. 

 

This warranty replaces any previous warranties and is the only warranty made by the Seller on this product. No increase or 

alteration, written or verbal, of the obligations of this Limited Warranty is authorized. 

 

 

Please refer to the website (www.vip-vision.com) for a full list of trading terms. 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for NVR32PRO(PACK)



























Reviews: