19
Method 2 - Using Internet Explorer (Recommended)
The default address for a Door Station will be 10.22.5.189, and your PC will need to be set to an IP
address that is in the same network range as the camera. We recommend 10.22.5.100
-
To be able to log in to the Door Station web interface you must be using Internet Explorer 5.5 or
above, we recommend Internet Explorer 9 as unfortunately IE10 is not compatible. You must also
have ActiveX Controls.
Enabling ActiveX Controls: If this is your first time logging in, you may get a system pops up asking
you to install ActiveX control webrec.cab. Please click OK button, and the system will automatically
install the ActiveX control. When finished you may need to close and re-open Internet Explorer. If
you can’t download the ActiveX file, please check whether you have ActiveX is allowed under your
Security Settings. Go to: Tools > Internet Options > Security > Custom Level > Then once in the
Security Settings, enable all ActiveX related options.
-
Open Internet Explorer and input http://10.22.5.189 in the IE address bar.
-
Log in with the Default factory name of
admin
and password is also
admin
.
-
You will then be able to go to System Config > Network Config > IP Address. Here you can change
the IP address to one that is compatible with your network, as well the corresponding gateway and
subnet mask. For Example
10.22.5.190.
Then
Click ok to save.
-
You have now successfully set the Door Station to a new IP Address and can now set up additional
Door Stations if necessary.
Summary of Contents for INTIPRKIT
Page 2: ...2...
