Loose the knob,pull out inner pole at
suitable height and then tighten knob,
make sure knob is tightened.
Connecting Holder’s cross to adaptor, screw it.
Insert the pole into the base and fasten the screw(M8) with wrench from the
bottom of base.
Put the knob at the pole, then fully tighten the knob.
+
-
APPLIED IN:
7~10” Tablet
3.5~6” Smartphone
STEP.2: INSTALL TRAY
STEP.1: INSTALL STAND BASE / POLE
STEP.3: INSTALL FOLDING ROD / HOLDER
Connect tray base and tray with
screw(M3*10) and screw shim.
Install the tray from the top of the pole,
adjust it to the appropriate position,
and tighten knob A
+
-
A
66
7 m
m
55
4 m
m
23
3 m
m
180 mm
TENSION ADJUSTMENT
Adjust the tension of the equipment
through wrench.
3
3
3
