8
Section 5: Wall Mounting
Keep the foam underneath the monitor before attaching it to a mount or accessory. No
mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. Remove the extra parts and the foam covering the back of the monitor. If
the monitor is already attached to the stand, remove the stand.
2. If the stand was not installed, press the button to remove the stand plate.
Button
Stand Plate
3. Remove the original screws x 4 (
1
) from the opening in the back of the monitor and
put them aside. Then use the NO. 2 screws provided to attach the adapters inside the
opening.
- Do not discard the original screws or the stand plate.
- Use only the screws provided. Refer to the image (
2
) for correct screw
placement.
1
Original
Screws x 4
NO. 2 Screws x 4
2
4. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or fixture as desired.
Mount
(Not included)