15
Section 11: GAMEPLUS Adjustment
1. Press any one of the buttons (
M
, , , E, ) to activate the navigation window.
5. Press the button to switch between Gameplus modes. According to the needs of your
game, choose the corresponding game icon. These game icons are primarily designed to
optimize your aim during shooting games, though they can be used for other scenarios.
Section 12: Troubleshooting
12.1 – General Problems
The screen is blank
•
Press the power button to turn the monitor on.
•
Confirm the brightness and contrast settings are set normally.
•
Check if the indicator light is flashing. If so, there is no signal from your video source.
•
If your source is a notebook or laptop, make sure it’s powered on and set to mirror or
extension mode.
The image is out of focus
•
Make sure the video cable is inserted properly at both ends.
The screen is flashing
•
Try an alternative power source. Insufficient power can cause this issue.
•
Make sure devices such as non-shielded speakers, fluorescent lighting, AC transformers,
table fans etc. are a safe distance away from your screen to avoid magnetic disturbances.
The color bleeds or visual effects appear unusual.
•
If your screen is all red or blue, or any colors disappear, check to see that the cable is
properly inserted. A loose connection can cause a bad signal.
•
Try connecting to another video source for comparison.
The screen appears to be scrolling, rolling, or moving unusually.
•
Check that your source frequency is within 55-76Hz.
•
Reconnect and ensure your video cable is secure.
The monitor needs cleaning
•
Make sure the monitor has been powered off before cleaning.
•
Always use soft, non-abrasive cloth when cleaning.
•
Use dry, non-abrasive cloth to gently remove debris or dust.
•
If necessary, lightly dampen a non-abrasive cloth with water and gently clean the surface.
•
Never use alcohol or ammonia-based cleaning solutions.
•
Never spray liquid directly onto any part of the monitor.
The indicator light does not work
•
Check if the power is on
.
•
Make sure the power cable is properly connected to the monitor and power source.