Viotek GN27CB, User Manual, Page: 7 / 20

7
Section 4: Stand Installation
Keep the foam underneath the monitor before attaching the stand.
1. Open the package and take out the monitor with foam still attached. Gently place
it on a desktop or table.
2. Remove the extra parts and the foam covering the back of the monitor. Press the
release button to remove the stand plate.
Button
Stand Plate
3. Use the included screwdriver and two NO.1 screws to fasten the stand plate to
the stem. Next, use the remaining two NO.1 screws to fasten the base to the
stem.
NO.1 Screw
12mm x 2
Stand Stem
Base
NO.1 Screws
12mm x 2
4. Insert the stand plate into the opening on the back of the monitor. It should click
into place. Make sure the stand is securely attached to the back of the monitor
then remove the monitor from the remaining foam section and stand it up on a
table or desk.
If needed, the stand can easily be detached from the monitor by pressing the
button near the stand plate. Make sure the monitor is laid on a flat surface
before removing the stem.
Monitor
Stem
Stand Plate
Button