11
2. Connect the other end of the cable to the corresponding connector on your monitor. See
the image below.
HDMI Connectors
DP Connector
3. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if a wall
outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
If you cannot locate the power button, please refer to Section 3.1.
FreeSync
Please note: FreeSync is turned off by default. To enjoy the benefits of FreeSync, you must
have hardware with FreeSync capability, a DisplayPort (DP) cable, and the latest graphic
drivers. To use this feature, connect your computer and monitor with a DP cable. For your
convenience, a DP cable is included.
After connecting, you may receive a prompt to enable the feature on your computer. If you
do not receive the prompt, you can enable the function in your graphics card menu. See your
graphics card manufacturer’s documentation for instructions on how to turn on and/or enable
FreeSync.
Section 8: Indicator Light
This light is located on the bottom of the monitor.
Indicator Light
Bottom View
Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light
indicates no video source has been detected. Red light indicates that no horizontal or vertical
signal has been detected or voltage is low. Please ensure your computer is on and all video
cables are fully inserted and/or connected.
Summary of Contents for GN27CB
Page 2: ......