Operation Instructions
Filling Water
Fill tap water(about 1.5L) into reservoir
through reservoir fill door (automatically
open with enough water pressure).
1
2
Filtration
Pour tap water on the side of the reservoir
rather than directly on top of the filter.
Allow water to filter completely before pouring
or refilling reservoir.
3
Disinfection
When water reaches the level of UV
disinfection device, press the touch button
to turn on the light to work.
It will stop working in 2 minutes, the indicator
will automatically light off.
Then the water in pitcher is ready for drinking.
4
Charging UV Disinfection Device
Use the USB charging cable in the package.
Connect the device with 5V output, such as phone
charger or computer USB connector.
The red light will turn on when charging; the blue
light will turn on after full charging.
NOTE: UV disinfection device could not be turn
on if the water did not cover the device.
NOTE: DO NOT use the device when charging
4
FOR BEST RESULT: Store the pitcher in the refrigerator or in a cool location. If the water has been leaving for
several days, discard it and refill the pitcher with fresh water.