Operation
To fill water into the kettle, remove it from the
power base and open the lid by press down
the lid opening button, fill with the desired amount
of water to the kettle. Always fill the kettle between
the minimum (0.5L) and maximum (1.5L) marks.
Too little water will result in the kettle switching
off before the water has boiled.
Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before connecting the power cord to the outlet.
Close the lid. Position the kettle on the power
base in place. Make sure the kettle contact
with the power base completely. Then the
indicator light will turn on to show the current
water temperature.
1
2
3
Press “Boil” or “Warm” button according
to your requirements.
3
２０
Boil
Warm
Boiling Mode, the indicator number will
increase until the water temperature go up
to 100
℃
. The indicator will turn off after a
few minutes without any action.
4
100
Boil
Warm
Summary of Contents for V-SK152A
Page 8: ...www viomi com...
