SENSOR INDICATORS
TROUBLESHOOTING
1.
If unit is flashing red, then an issue was detected by the unit. Unplug or power down the unit.
2.
Plug the unit back into the wall or turn on power to unit. Exit the space within 60 seconds.
3.
When you return to the space, identify the color of light on the sensor indicator. If unit is
green or solid red, the unit is working properly. If unit is still flashing red, contact customer
service at Violet Defense at 407-433-1104.
4.
If unit is non-responsive (i.e. no indicator light showing), please contact Violet Defense for
technical support at 407-433-1104 or
.
Each S.A.G.E. UV unit has indicator lights that
help you determine the status of the unit.
CLEANING THE UNIT
• Do not use abrasive cleaners to clean the unit.
•
To clean the unit, wipe down the metal plates with stainless steel polish using a microfiber
cloth.
TROUBLESHOO
TING
© Copyright 2020 Violet Defense, LLC All Rights Reserved SUV-GEN2-UM2020
10
Color of Light
Meaning
Flashing Green
Unit is ready to begin cleaning when room
becomes unoccupied.
Solid Green
Unit has successfully completed its cleaning
cycle. If unit detects motion, the unit will change
to solid red, even if cycle completed.
Solid Red
Unit was interrupted during the cleaning cycle.
Cleaning will resume when room becomes
unoccupied again during the programmed times
for operation.
Flashing Red
One of the safety sensors has detected an issue.
Please see troubleshooting section for further
information.