16
-
The unit must be switched OFF
-
the "VOLUME" control must be set to minimum
-
left and right channel should ALWAYS be set the same
-
never increase the setting by more than ONE step per
channel at a time.
If you find your HPA V100's volume could be somewhat softer (in order
to improve volume control range e.g.), push the switch labelled "-6dB"
(half gain) or "-12dB" (quarter gain) in upward direction.
If you find your HPA V100 should provide more gain, do so with the
switch labelled "+6 dB" (double gain) or "+12 dB" (quadruple gain).
Ex-factory, all switches are set to their lowest position - i.e. 0 dB or unity
gain - which should be sufficient for most applications.
OPERATION
Most control elements and indicators are located on the front panel.
POWER SWITCH
The unit is put into operation by means of the power switch. Power-on
status is indicated by the blue LED below.
VOLUME CONTROL
The "VOLUME" control sets the desired output volumes for left and right
channel simultaneously.
