User Manual
Viola M2M Gateway Enterprise
Edition
Firmware Version 2.4
18
Document Version 3.0
4 Network Configuration
This chapter describes how to configure network interfaces on M2M Gateway.
4.1
Configuration screens
Network configuration screens can be found from main menu and pressing
Network Configuration icon.
Figure 13. Network Configuration Menu
Network Interfaces
Displays running network configuration on the top on Interfaces Active
Now list. This list contains all the interfaces running locally, including VPN
interfaces. On the bottom there is a listing of physical interfaces (eth0 and
eth1). Interface confiuration can be changed by pressing underlined interface
name. See figure 14.
Figure 14. Network Interface List
Routing and Gateways
Configures default route, static routes and displays running routes. Default
route can be changed from this screen. Enter the correct interface and IP
address and press Save button.
Note!
Do not define more than one default route.
Hostname and DNS Client
Configures hostname and DNS settings.
Host Addresses
Shows hostnames assigned to IP addresses.
