45
note that the detection area and sensitivity are also used for the Smart Search
information. There won’t be any Smart Search information stored outside
the detection area. So, it’s better to enable the whole area if the motion
detection for the camera is disabled (and only Smart Search is used).
Press
ENTER
in
Settings..
to call up Motion Detection Setup (as shown) for this
camera. In Motion Detection Setup, the video area is divided into many small
grids, and the area with
transparent grids
is the area which will
be detected for
motion
, while gray grids not detected for motion. Besides, there is a (green)
Mask window.
Following is a brief description for the operations:
Numeric
(Mouse:
)
Press these buttons to select the camera.
Press these buttons to move the Mask window.
+/-
(Mouse: Left click and drag)
Press these buttons to resize the Mask window.
ENTER
(Mouse:
)
Press this button to set/reset the area under the Mask window.
MODE
(Mouse:
)
Press this button to set/reset the whole video area.
