43
6.2.2 Motion Setup
In Camera Setup, press
ENTER
to call up Motion Setup as shown when the
highlighted option is
Motion Settings..
of the camera to setup. The Motion setup
allows the administrator to define how the system responds to the detected motion for
the camera.
The general operations are as below:
(Mouse: Left click)
Press these buttons to select the items.
Numeric (ENTER)
Press these buttons to select the camera.
COPY
(
)
Press this button to copy the Motion settings, including Detection settings, of the
focus camera to all the following cameras. (EX. focus camera is 5, its Motion
settings will be copied to those of cameras 6-16.)
ESC
(Mouse: Right Click)
Press this button to escape from this screen, and return to Camera Setup display.
If the Save dialog is shown, press
ENTER
to exit and save,
ESC
(Mouse:
Right Click)
to exit without saving.
Following is a brief description for each item and its specific operations:
Duration
– response duration to define at most how long (in seconds) the Alarm
Out relay and the Buzzer will keep being triggered after motion is detected for
