Viola Systems arctic c-1230 Quick Start Manual Download Page 2

Figure 1

. Front Panel   

2. Physical connections and switches 

Figure 2. 

Back Panel

 

1. SMA (female) antenna connector 
2. SMA (male) antenna 
3. SIM Card slot 
 

3. SIM Card 

SIM card slot is located on the rear panel of the Arctic device (see figure 2). 
Push the yellow button in the SIM card slot to eject the SIM card tray and 
insert the SIM card to the tray (contacts facing up) and push the SIM card tray 
firmly and carefully back to its holder. 
 

Note!

 If your SIM card requires a PIN code, please do not install the SIM card 

before you set up the Arctic device PIN code settings (see chapter 5).  
The SIM card could lock up if done otherwise.  
 
Also please note, It is recommended 

NOT to insert or remove

 

the SIM card 

while the Arctic device is in operation and connected to the mobile network. 

1. Power supply 12-48 VDC 
2. Console serial port (RS1) 
3. Power switch 
4. Console/serial port switch 
5. DIP switches 
6. Application serial port (RS2) 
7. LAN port 

Summary of Contents for arctic c-1230

Page 1: ...ion is available at http www violasystems com docs 1 Overview This document is a short description how to power up the Arctic product and how to get it operational This document contains the following sections Physical connections and switches Inserting a SIM card Setting an IP address using a web browser GPRS 3G LTE network settings Viola Systems Ltd Phone 358 0 201 226 226 www violasystems com s...

Page 2: ... the SIM card tray firmly and carefully back to its holder Note If your SIM card requires a PIN code please do not install the SIM card before you set up the Arctic device PIN code settings see chapter 5 The SIM card could lock up if done otherwise Also please note It is recommended NOT to insert or remove the SIM card while the Arctic device is in operation and connected to the mobile network 1 P...

Page 3: ... with netmask 255 0 0 0 Check with ping command Connect to the Arctic device using the web browser The default address of the Arctic is https 10 10 10 10 Please make sure to use https and not http see figure 3 Login to the device the username is viola adm and the default password is violam2m Note It is highly recommended that the default password is changed before the product is connected to the p...

Page 4: ...interface Set Access Point Name APN appropriately usually INTERNET or operatorname com This setting is depends on the mobile operator please refer to your operator documentation for the correct APN setup Setup other settings if needed usually PIN code authentication username and password Reboot Arctic device and check settings from System Status page Figure 5 Mobile WAN settings ...

Reviews: