(1)
(2)
(3)
(4)
(5)
• Do not turn on ‘Motion Detection’ unless your vehicle is parked.
If ‘Motion Detection’ is enabled while driving, the camera may not
record continuously.
• It is recommended to keep the G-sensor set to ‘Low’ (default
setting).
Adjust the angle by moving the lens up / down.
①
For GPS version mount, use the female Mini USB port on the
mount or on the camera’s side.
②
For non-GPS version mounts, use the female Mini USB port
on the camera’s side.
3) Adjust the View Angle
Note:
Tips:
• Do not install / mount the camera in a location that interferes with
the driver’s visibility and safety.
• Install / mount the camera close to the rearview mirror so that both
sides of the scene being recorded are equally covered by the
camera’s FOV (field of view).
• To ensure a clear view on rainy days the lens should be positioned
within the windshield wiper’s sweeping range.
• Do not install / mount the camera on or near airbag panels.
• Installation / mounting location should not be affected by sun
control film (window tint). There should not be any other electronic
equipment close to the camera for optimal performance.
Note:
Do not install / mount the camera on or near an airbag panel
or within the airbag’s working range. The manufacturer is not liable
for any injury or death caused by the deployment of the airbag.
Introduction
