20
Tip
If you need to keep the camera cable secure when you are mounting the
camera on your head or body you can use the clip with snaps that is included with
your unit. Just snap the strip around the cable and clip it to your clothing in a
position that keeps the cable in place.
Optional Mounting Accessories
If the accessories provided with the POV.1.5 don’t work for your particular
application there are a number of additional mounting accessories available:
•
Universal Mount
- A flexible rubber sleeve that keeps your camera head
secure with an adhesive-backed Hook and Loop pad to attach it to a helmet or
other smooth surface.
•
Goggle Mount - Designed to work in conjunction with goggles and the
Universal Mount - the Goggle Mount is a great way to secure your cam with or
without a helmet.
•
Double Hook & Loop Mount
-A simple but flexible strap mount that easily
secures the camera head to most vented helmets using a hook and loop
fastening system. Also good for creative mounting on bikes, autos and
recreational vehicles.
•
Right Angle Hook & Loop Mount - The Double Hook & Loop mount with a
right angle twist when the mounting location or specific application requires
the mount to be rotated 90 degrees. This mount is useful for mounting on
handle bars, paddles, or anything under a 1 1/2 inch circumference.
•
Adhesive Mount Kit - This mount kit provides a lightweight plastic base
with adhesive backing and zip ties to secure the camera wherever you need
it. This mount is for semi-permanent solutions. Kit includes 4 adhesive bases
and 10 zip ties.
•
6-inch or 12-inch Flex Mount
- A flexible steel rod that can hold the
camera in almost any position. The flex mounts have a 1/4-20 threaded male
connector on one end and a 1/4-20 threaded female receptacle on the other.
Available in either a 6-inch or 12-inch version.
•
Ultra Clamp - This can be used to mount the camera to items that are
1/8” to 1 5/8” thick, such as a car window or bike seat post. Works great in
conjunction with the flex mounts or as a stand-alone mount for shooting hard
to get angles.
For a list of optional accessories visit our website at www.vio-pov.com.
Mounting the POV.1.5 Recorder
The POV.1.5 main unit can be mounted anywhere that provides enough cable
length for the camera head to be placed where you want it. If you have the
camera attached to your head or body a typical application would be to attach the
POV.1.5 unit to your belt, vest, or place it in a backpack.
Keep in mind that the built-in microphone on the POV.1.5 is located on the digital
A/V cable, in the small square block that is located roughly halfway down the cable
from the camera head. If you want to capture your voice on the audio you should
place the mic part of the cable away from any wind noise and as near to your head
as possible.
