Vinvautz Grand Cru Classe VZ110BDHK, User Manual, Page: 3 / 15

INSTALLATION INSTRUCTIONS
BEFORE USING YOUR WINE CELLAR
Remove the exterior and interior packing.
Before connecting the Wine Cellar to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of malfunction in the
cooling system from handling during transportation.
Clean the interior surface with lukewarm water using a soft cloth.
When disposing your old appliance, please choose an authorized disposal site.
INSTALLATION OF YOUR WINE CELLAR
Place your Wine Cellar on a floor that is strong enough to support it when it is
fully loaded.
To level your Wine Cellar, adjust the front leveling leg at the bottom of the Wine
Cellar.
Locate the Wine Cellar away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient temperatures
may also cause the Wine Cellar to perform not properly.
Avoid locating the Wine Cellar in moist areas.
Plug the Wine Cellar into an exclusive, properly installed-grounded wall outlet.
Do not cut or remove the power cord under any circumstances. Any questions
concerning power and/or grounding should be directed to a certified electrician
or your local authorized service centre.