10
Mounting the camera (optional Quickfit adaptor)
If not already attached, secure the Quickfit adaptor
to the slide plate
with the two screws
.
Free the Quickfit wedge
from the adaptor by simultaneously pushing in the safety catch
and operating the wedge release
Fit the Quickfit wedge
to the camera with the two screws provided
Set the platform level and engage the centre lock
Insert the forward end of the wedge into the forward end of the adaptor. Lower the rear of the
wedge into the adaptor until an audible click indicates that the wedge is locked.
Mounting the camera (optional Quickfit adaptor)
(21)
(22)
(23)
(24)
(25)
(1)
(14)
(3)