17
Mounting the camera
5
Remove the slide plate
from the head by releasing the slide plate clamp
, pressing the slide lock
release
and pulling the plate to the rear.
6
Attach the slide plate to the camera or camera mounting plate under the approximate centre of the
camera's weight using both camera mounting screws
. Position the screws as far apart as possible.
7
Set the platform level and engage the centre lock
.
8
Push the slide plate and camera into the platform from the rear, ensuring slide lock release
into position.
9
10
11
12
Fig 2.1 250IT Interconnections
AC IN
SYNCH
DATA OUT