18
Section 3
Tools and Materials
General
1
The following special tools and consumable materials will be required for servicing, disassembly, repair,
assembly and adjustment.
Special tools
ITEM
PART No.
PROCEDURE
Pin press
3431-912TL
Installing dowel pin to
connect actuator shaft and
adjustment slide
Special thumb screw
3441-907TL
Assembling pan and tilt drag
units
NOTE:
Adhesives and lubricants are not supplied by Vinten Broadcast Ltd and should be
obtained under local arrangements
Consumable materials
ITEM
PART No.
USE
Grease, Easyrun 50
Z150-081
Lubrication
Grease, Castrol LM
Z150-123
Lubrication
Loctite 222E
Z002-075
Screw locking
Loctite 406
Z002-097
LED housings
Loctite 495
Z002-059
Spring cap buffer
Silcoset 153
Z002-036
Pin retainer
Vinten fluid No. 3
3051-30
Drag fluid