Operators Guide
15
Pan bar
Pan bar mounting points (6) are located at the rear of the head on either side of the camera
mounting platform. The pan bar (5) is attached using a pan bar clamp (4), with angular
adjustment available on the mount serrations. A fixed pan bar is supplied with the Vision 3AS,
5AS and 8AS heads. A telescopic pan bar is supplied with the Vision 10AS head. A second pan
bar may be fitted on the other side of the head if required.
Field service spares kit
A field service spares kit (V4045-1902), that includes brake levers and a spare battery, is
supplied with all Vision AS pan and tilt heads. See the spares part listing on page 32 for more
information.