29
11.4 Remove the nut (9.1), the bearing (9.2) and the washer (9.3) from the shaft of the pan base (
, item 3.2).
11.5 Referring to
, pull the pan base (3.2) and associated components (pan bearing (2) and
drag disc (3.1)) out of the centre housing (1.2). Ensure two springs (7.2) and two drag adjustment
shoes (7.1) are retained.
11.6 Pull off the pan bearing sleeve (1.4). Examine the sleeve for wear and replace if necessary.
Assembly
Lubrication
12
During assembly, lubricate components as follows:
12.1 Shell Darina R2 (yellow) grease
12.1.1
The threaded part of the shaft of the pan base spares assembly (
Item 5.2).
12.1.2
The smaller thread of the tilt equalizer stud (
Item 5.2).
12.1.3
The pivot of the slide plate clamp arm (
Item 3)
12.2 AGIP PV (NLGI 2) (white) grease
12.2.1
The pan bearing (
Item 2).
12.3 Kluberlub BE41-501 (black) grease
12.3.1
The larger thread of the tilt equalizer stud (
Items 5.2).
12.3.2
The threads of the pan drag adjuster sleeve (
Items 7.1).
12.3.3
The thread of the slide plate lock insert (
Item 2.3)
12.4 PTFE dry lubricant
12.4.1
The pan shaft ball bearing (
Items 9.2)
Pan drag mechanism
13
Install the pan drag mechanism as follows
13.1 If necessary, separate the components of the adjustable drag disc (3.1) and apply 5 grams of
Optalus A0 140 drag fluid.
13.2 Install the pan bearing sleeve (1.4) on the centre housing (1.2).
13.3 Install the pan bearing (2) on the pan base (3.2).
NOTE:
The adjustable drag disc (3.1) contains 5 grams of Optalus A0 140 drag fluid. If required,
separate the components of the adjustable drag disc and clean.