manualshive.com logo in svg

Vinten OSPREY stuido S, User Manual

Share
Download
Vinten OSPREY stuido S User Manual Download Page 5

3

Safety

Water, Moisture and Dust

Operating Environment

Cleaning

Maintenance

Critical Data

!

WARNING! 

The product must only be operated on a 

smooth and level surface.

!

WARNING! 

The product must always be secured (all 

three wheel brakes applied) when left unattended. Do not 

leave the product unattended on a sloping surface.

!

CAUTION!

 Do not exceed the payload limit for the 

product of 80 kg (176 lb).

!

CAUTION!

 The product must only be operated with a 

minimum payload of 10 kg (22 lb) to pre-load the column 

correctly.

!

WARNING! 

Protect the product from water, moisture and 

dust. 

!

WARNING! 

The product should not be used outside 

the operating temperature limits. Refer to the product 

technical specifications for the operating limits for the 

product.

!

CAUTION!

 Do not use solvent or oil-based cleaners, 

abrasives or wire brushes. Clean with a dry lint free cloth.

!

WARNING! 

The fitting of non-approved parts or 

accessories, or the carrying out of non-approved 

alterations or servicing can be dangerous and could 

affect the safety of the product. It may also invalidate the 

terms and conditions of the product warranty.

Mass

Pedestal unladen: 89.4 kg / 197.5 lb 

Pressure

Maximum pressure:.  .. 

15 bar (218 psi)

 

Load

Maximum load: .  .. ..  .. 80 kg / 176 lb 

≤ 80 kg      

176 lb

15 bar (218 psi))

 

Summary of Contents for OSPREY stuido S

































Reviews:

No comments

Brands by name

Popular brands

Load more brands