manualshive.com logo in svg

Vinten OSPREY stuido S, User Manual

Share
Download
Vinten OSPREY stuido S User Manual Download Page 11

9

Installation

Unpacking

Unpack the pedestal, ensuring that all transport packing and retaining 

fixings are removed.!

!

WARNING! 

The studio s pedestal has a mass of 89.4 

kg (197.5 lb). Take care when lifting the pedestal. Do 

not lift the pedestal by the steering ring - use the lifting 

apertures. Do not release the safety catch until the 

payload has been fitted.

Steering mechanism checks

Align the steering indicator (17) with the brake pedal (7). Press the 

crab/steer pedal (6) to select CRAB Turn the steering ring and check 

that all three wheels turn together and all point in the same direction.

Align the steering indicator (17) with the brake pedal (7) and press 

the crab/steer pedal (6) to select STEER. Turn the steering ring and 

check that two of the wheels lock in the straight-ahead position and 

that the third wheel (below the brake pedal) can be turned by the 

steering ring.

Summary of Contents for OSPREY stuido S

































Reviews:

No comments

Brands by name

Popular brands

Load more brands