Vinteck
V-8 – true-bypass MIDI switching pedalboard
pag.8
Edition 01eng rev. 0
6 – PROGRAMMING AND MIDI MANAGER
BUTTON “L/P” AND BUTTON “UP”
L/P button
Make selection between LOOP and PROGRAM function of buttons 1 to 8
BLU led “L” ON button 1 to 8 make direct activation of loops
WHITE led ON button 1 to 8 recall programs
Other function:
whit white led “P” on, keep pressed for 3 seconds enter in MIDI MAPPING menu.
UP button
Whith white led “P” on, make increments of banks, if banks are active.
Keep pressed for decrease.
Other function:
Whit BLUE led ON keep pressed to enter in “activation of bank” function
PATCH PROGRAMMING
Programs allowed are 80, 10 banks of 8 programs.
To program combinations loops (1-8) – switch (1-4)
Whit white led ON:
Keep pressed the button of program (ex. Nr. 3) for about 2.5 seconds.
Programming is active when white led start to blink
Press buttons of loops desired. Blue led show active loops.
Keep pressed buttons 1-4 for about 2.5 secs to activate switches. Yellow led indicate switches ON.
Confirm and memorize programs pressing L/P button.
BANKS ACTIVATION
Factory preset comes with bans 1-9 not active. Only bank 0 is active.
To activate banks 1-9 .
With blue led “L” press and keep for about 4 secs button UP
Display shows b0 (bank zero)
Press UP to increase bank. Press button “L/P” to activate bank.
Active banks show on display the DOT.
Banks may be activated without sequence. (ex. Banks 0, 4 and 7 active).
Following display show T0, T1, T2, T3. This is a function not active on V-8
To exit and confirm press button 8.
MIDI SETTINGS
INPUT CHANNEL
Press buttons 1 and 5 together, keep pressed 3 secs.
Display blinks between IN and a number from 00 to 16.
00 is OMNI, 1 to 16 is channel selection of input.
Choose with buttons UP and L/P (as DOWN) , then confirm and exit with button 8.
