Instructions: Vino Series Post (for Pins or Rails)
Problems?
Try Vino Pins Flex installation using BILT 3D intelligent instructions, visit
www.vintageview.com or give us a call at 303-504-9463.
Maintenance and Care:
Vino Series wine racks are backed by a lifetime warranty. They should be regu-
larly checked for tightness. Should any piece to be found to be loose, tighten by
hand until secure. If the face of the wall surface shows signs of breakage, dis-
continue use immediately until the wall may be adequately repaired. Vino Series
products may be cleaned with a damp cloth and mild dish soap — abrasive pads
or steel wool should NOT be used as they will damage the finished surfaces of
the parts.
8. HANG THE NEXT MOUNTING STRIP
Repeat steps 5-8 with the second Mounting Strip, centering it horizontally with the second mark on your wall
from Step 4 (vertical installations, ensure tops of Strips are even).
9. INSTALL MOUNTING HOLE CAPS
Press supplied mounting hole caps into the open holes of the face of each Mounting Strip (Figure J).
10. ADD WINE
Only the good stuff.
Figure J