Vino Series Flex
Installation Instructions for Vino Series Flex (SKUTKTKTKT)
• (2) Backer Strips (unique neck
and base for Vino Pins)
• (6) mounting hole caps
Parts List
Important Note:
These installation instructions are only for attaching the Vino Series Flex (for Pins or Rails) mounting
system into solid wood, plywood surface, or drywall with a minimum thickness of 1/2 inches (12.7mm).
Figure A
Figure B
1. Identify Neck and Base Pieces
(Pins option only):
The neck piece of the Vino Pins features a narrower divot and
corresponds to the Backer Strip with the higher of the offset
wine rack mounting holes.
• (2) Plastic couplers
• (4) spiral drywall anchors
• (6) screws
• (2) toggle bolts
• (18) Vino Series screws
• Phillips head screw driver
• Level
• Pencil
Required Tools
• Tape measure
• Drill
• Handy friend (always helps)
2. Assemble Pins/Rails to Strip
Insert one Vino Series screw through the back of either the
Base or Neck strip and thread the first Vino Pin or Rail until
tight against the surface of the strip. Repeat until all Pins or
Rails are attached.
3. Choose Bottle Direction
(Pins option only)
Decide if you want the necks of the bottles facing left or
right then identify the neck strip (the one with the assem-
bled Pins offset upward).
for Vino Pins
for Vino Rails
