Evolution Low Profile Post System
Installation guide for the standard Low Profile Post Wine Rack (LP-FCP-10)
Post:
(min 2 Posts required)
• (1) Top Post Section
• (1) Bottom Post Section
with c-Channel
• (2) Mounting Bases
• (4) Self-drilling screws
• 1/8” Drill bit
Important Note:
This procedure will assist you with installing the VintageView Evolution Low Profile System in standard floor-to-ceil-
ing applications for ceiling heights up to 122” (3099mm). If Post Section features welded Mounting Bases, visit
www.vintageview.com/welded
Low Profile Post System Post, Plates, and Wine Rods are sold individually unless purchasing a complete wine
rack kit.
Fasteners:
Fasteners for securing Low Profile Plates racking to the Post is included, but hardware for floor or ceiling surfaces
is not. When installing, please use the following recommendations for fasteners:
Plates:
(
min 2 required per row)
• (1) Low Profile Post Plate,
choice of three depths
• (2) Self-Drilling Screws
Rods:
(
min 2 required per row)
• (1) Wine Rod,
choice of three widths
• (2) Evolution Screws
• 5mm Allen Key
Required Tools:
• Power drill
with low-torque setting
• Phillips head drill bit
• Phillips head screwdriver
• Level or Square
• Rubber Mallet
• Pencil or Marker
• Tape measure
• Metal cutting saw
• Metal file
