6
www.vintageair.com
901304 REV D 02/28/2017, PG 6 OF 23
Disconnect battery.
Remove battery (retain).
Drain radiator.
Remove OEM heater hoses (discard).
Remove OEM blower assembly (discard).
Remove OEM heater wiring (discard).
Remove front passenger side wheel.
Engine Compartment Disassembly
1.
2.
3.
4.
5.
6.
7.
Perform the Following:
NOTE: Before starting the installation, check the function of the vehicle (horn, lights, etc.) for proper
operation, and study the instructions, illustrations, & diagrams.
Figure 1
Condenser Assembly and Installation
Compressor and Brackets
Pulleys
1. Refer to separate instructions included with the condenser kit to install the condenser.
2. Binary switch installation (Refer to condenser instructions).
1. Refer to separate instructions included with the bracket kit to install the compressor bracket.
1. In most instances, the belt lengths will remain the same.
OEM Heater
Hoses
Heater Hose
Clamp
Summary of Contents for 571064
Page 23: ......
