9
CONDENSER ASSEMBLY & INSTALLATION
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE CONDENSER KIT TO INSTALL THE
CONDENSER. REFER TO FIGURE 5 BELOW FOR CONDENSER LOCATION.
FIGURE 6
REFER TO SEPARATE INSTRUCTIONS INCLUDED WITH THE BRACKET KIT TO INSTALL THE
COMPRESSOR BRACKET. REFER TO FIGURE 6 BELOW FOR COMPRESSOR MOUNTING POSITION.
IN MOST INSTANCES EXISTING BELT LENGTHS WILL REMAIN THE SAME. SEE FIGURE 6 BELOW.
COMPRESSOR & BRACKETS
PULLEYS
NOTE: BELT ROUTING MAY VARY
WITH DIFFERENT BRACKET SETS.
ALWAYS REFER TO INSTRUCTIONS
INCLUDED WITH BRACKETS.
MOUNT THE
COMPRESSOR
USING TABS
"G" & "C"
TAB
"C"
TAB
"C"
TAB
"G"
TAB
"E"
TAB
"A"
GENERATOR
OR
ALTERNATOR
WATER PUMP
PULLEY
CRANKSHAFT
PULLEY
COMPRESSOR
PULLEYS (VINTAGE AIR) SHORT PUMP
SMALL BLOCK CHEVY (STEEL PULLEY)
22503-VCA
- WATER PUMP PULLEY
(DOUBLE GROOVE)
22506-VCA
- CRANKSHAFT PULLEY
(DOUBLE GROOVE)
22507-VCA
- CRANKSHAFT PULLEY
(TRIPLE GROOVE)
(WITH POWER STEERING
A 3 GROOVE CRANK
PULLEY IS REQUIRED)
GEN IV 1968-76 CORVETTE
w/o AC
901174-PCZ REV A 8/3/05, GEN IV 68-76 CORVETTE w/o AC INSTRUCTIONS PG 9 OF 29
DRIER
O.E.M.
RADIATOR
CORE
SUPPORT
091069-CCL
#6 DRIER-CORE
SUPPORT HARDLINE
091071-CCD
#8 COND-CORE
SUPPORT HARDLINE
FIGURE 5
FLOW
OUT
IN
BINARY
SWITCH
