7
901196 REV B 07/08/14, INST 1970-78 CAMARO wo AC EVAP KIT PG 7 OF 29
NOTE: Removal of dashboard is not required to install the evaporator. Vintage Air recommends that
you utilize the factory service manual when you disassemble and reassemble the dashboard.
Remove the Following:
1.
Glove box door (See Figure 3, below).
2.
Glove box (discard, retain screws) (See Figure 2, below).
3.
Heater assembly and all related ducting (discard, retain screws) (See Figure 3, below).
4.
Driver/passenger side louver outlets (retain). Instrument panel must be removed to get to left outlet and
control panel (See Figure 3, below).
5.
Control panel assembly (discard) (See Figure 3, below). Refer to control panel conversion kit instructions
for installation of controls.
6.
Remove passenger side kick panel (retain). Disconnect passenger side fresh air cable from panel (See
Figure 3, below). Disconnect driver/passenger cable astro-ventilation ducting (discard).
7.
Remove OEM defrost duct assembly (discard).
Driver Side
Astro Ventilation
Duct
Figure 3
Driver Side
Louver
Driver Side
Kick Panel
Control
Panel
Instrument
Panel
Passenger Side
Louver
Passenger Side
Astro
Ventilation
Duct
Astro
Fresh
Passenger Side
Kick Panel
Glove Box
Door
Heater
Assembly
Passenger Compartment
Glove Box
Figure 2
